Configuring an IPv6 Network with RIPng using the instructions and information

Packet Tracer Activity

• Configuring an IPv6 Network with RIPng

 IOS Command List

router>enable
router#configure terminal
router(config)#hostname R1
R1(config)#ipv6 unicast-routing
R1(config)#interface g0/0
R1(config-if)#ipv6 address FE80::1 link-local
R1(config-if)#ipv6 address 2001:DB8:DA:1::1/64
R1(config-if)#ipv6 rip RIP1 enable
R1(config-if)#no shut
R1(config-if)#interface s0/0/0
R1(config-if)#ipv6 address FE80::1 link-local
R1(config-if)#ipv6 address 2001:DB8:DA:2::1/64
R1(config-if)#ipv6 rip RIP1 enable
R1(config-if)#ipv6 rip RIP1 default-information originate
R1(config-if)#clock rate 128000
R1(config-if)#no shut
R1(config-if)#interface s0/0/1
R1(config-if)#ipv6 address FE80::1 link-local
R1(config-if)#ipv6 address 2001:DB8:CD1:C::2/64
R1(config-if)#no shut
R1(config-if)#exit
R1(config)#ipv6 route ::/0 s0/0/1
R1(config)#exit
R1#copy running-config startup-config
R1#show running-config
R1#show ipv6 route
R1#show ipv6 int brief